TEN 6-1213N

DC/DC Converter TEN 6N Series, 6 Watt • • • 2:1 input voltage range • • • • • • Input filter meets EN 55032, class A High efficiency Operating temperature range –40°C to +85°C Overload protection UL 62368-1 IEC 62368-1 I/O-isolation 1’500 VDC The TEN 6N series is designed for an optimized cost/performance ratio of DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal filter for EN55032 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. DIP-24 plastic package Industry standard pinout 3-year product warranty Models Order Code Input Voltage Range TEN 6-1210N TEN 6-1211N TEN 6-1212N TEN 6-1213N TEN 6-1215N TEN 6-1221N TEN 6-1222N TEN 6-1223N TEN 6-2410N TEN 6-2411N TEN 6-2412N TEN 6-2413N TEN 6-2415N TEN 6-2421N TEN 6-2422N TEN 6-2423N TEN 6-4810N TEN 6-4811N TEN 6-4812N TEN 6-4813N TEN 6-4815N TEN 6-4821N TEN 6-4822N TEN 6-4823N www.tracopower.com 9 - 18 VDC (12 VDC nom.) 18 - 36 VDC (24 VDC nom.) 36 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA 1'200 mA 1'200 mA 500 mA 400 mA 250 mA 500 mA 250 mA 200 mA September 20, 2023 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA –5 VDC –12 VDC –15 VDC 500 mA 250 mA 200 mA typ. 75 % 78 % 82 % 82 % 84 % 78 % 82 % 82 % 77 % 80 % 84 % 84 % 84 % 80 % 84 % 84 % 77 % 80 % 84 % 84 % 84 % 80 % 84 % 84 % Page 1 / 5 TEN 6N Series, 6 Watt Input Specifications Input Current - At no load 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: - At full load 24 Vin models: 48 Vin models: Surge Voltage 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin models: 24 Vin models: 48 Vin models: Start-up Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Short Circuit Input Power 40 mA typ. 20 mA typ. 10 mA typ. 440 mA max. (3.3 Vout model) 610 mA max. (5 Vout model) 610 mA max. (12 Vout model) 610 mA max. (15 Vout model) 610 mA max. (24 Vout model) 530 mA max. (5 / -5 Vout model) 610 mA max. (12 / -12 Vout model) 610 mA max. (15 / -15 Vout model) 220 mA max. (3.3 Vout model) 300 mA max. (5 Vout model) 300 mA max. (12 Vout model) 300 mA max. (15 Vout model) 300 mA max. (24 Vout model) 260 mA max. (5 / -5 Vout model) 300 mA max. (12 / -12 Vout model) 300 mA max. (15 / -15 Vout model) 110 mA max. (3.3 Vout model) 150 mA max. (5 Vout model) 150 mA max. (12 Vout model) 150 mA max. (15 Vout model) 150 mA max. (24 Vout model) 130 mA max. (5 / -5 Vout model) 150 mA max. (12 / -12 Vout model) 150 mA max. (15 / -15 Vout model) 25 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 7 VDC min. / 8 VDC typ. / 9 VDC max. 14 VDC min. / 16 VDC typ. / 18 VDC max. 32 VDC min. / 34 VDC typ. / 36 VDC max. 8.5 VDC max. 16 VDC max. 35 VDC max. 30 mA typ. 20 mA typ. 15 mA typ. 1'500 mA (slow blow) 700 mA (slow blow) 350 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type 3 W max. Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) - Voltage Balance (symmetrical load) ±2% max. 0.5% max. 0.5% max. 1.2% max. 1.2% max. (Output 1) 1.2% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 TEN 6N Series, 6 Watt Ripple and Noise Capacitive Load - 20 MHz Bandwidth - single output 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Short Circuit Protection Overload Protection Output Current Limitation Transient Response - Response Deviation - Response Time 80 mVp-p max. 470 µF max. 470 µF max. 100 µF max. 100 µF max. 47 µF max. 100 / 100 µF max. 100 / 100 µF max. 100 / 100 µF max. Not required ±0.02 %/K max. Continuous, Automatic recovery Foldback Mode 110% min. of Iout max. 145% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 300 µs typ. / 600 µs max. (75% to 100% Load Step) Safety Specifications Safety Standards CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten6n PD 3 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions EN 55032 class A (internal filter) EN 55032 class A (with external filter) External filter proposal: www.tracopower.com/overview/ten6n - Conducted Emissions - Radiated Emissions General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Housing Material - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF 95% max. (non condensing) –40°C to +85°C +100°C max. –50°C to +125°C 2.5 %/K above 60°C (3.3 & 5.0 Vout models) 3.3 %/K above 70°C (other models) See application note: www.tracopower.com/overview/ten6n Natural convection (20 LFM) 6'000 m max. 330 kHz typ. (PWM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 1'000 pF typ. 1'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TEN 6N Series, 6 Watt Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2.5 µm min.) Gold (75 - 125 nm), glossy Plastic Case PCB Mount THD (Through-Hole Device) DIP24 Lead-Free Wave Soldering 260°C / 10 s max. 12.7 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 72797e98-402f-4a39-ba0d-432ee696cc89 Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten6n All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TEN 6N Series, 6 Watt Outline Dimensions Pinout 9 Pin 11 Bottom view 23 22 2 16 20.3 (0.8) 3 15.22 (0.599) 2 14 2.54 Dual in (GND) in (GND) 3 in (GND) 9 No pin 11 NC 14 +Vout 16 (0.100) Single in (GND) Common out out +Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) NC: Not connected +Vin (Vcc) 4.1 Ø0.5 (Ø0.02) 2.54 15.24 (0.600) (0.100) 5.08 4.5 (0.200) (0.18) (0.16) 10.2 (0.40) 31.8 (1.25) Dimensions in mm (inch) Tolerances x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerance: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5